2023-PA-041-V | Assembled SVXLink Analog HotSPOT 2m VHF 500mW
2023-PA-041-V | Assembled SVXLink Analog HotSPOT 2m VHF 500mW
Included
- our enclosure
- Raspberry Pi Zero 2 W
- 32GB SD card
- 805SP Nagoya Triple Band Antenna
-
assembled and rigorously tested !
Experience the power of the SVXLink Analog Hotspot, a cutting-edge HAT designed exclusively for the Raspberry Pi Zero 2 W.
Packed with a formidable VHF 2 m band radio module, this versatile device is accompanied by a state-of-the-art DAC/ADC, enabling it to function flawlessly as an EchoLink/SVXLink analog hotspot.
What's more, with the combination of a remote SVXLink with AnalogBridge (DVSwitch), you gain access to digital networks, including the Brandmeister and OpenDMR network, unleashing a world of limitless possibilities.
Datasheet
- Raspberry PI Pin compatible
- PCB ENIG (Electroless Nickel Immersion Gold)
- VHF 2m band frequency: 134~174 MHz
- Tx and Rx frequency, Tx and Rx CTCSS, CDCSS can be set separately.
- Band width 12.5KHz / 25 KHz
- Output power 27dBm / 500mW
- RX Sensitivity:-124 dBm
- Adjustable RX en TX volume
- 1 ppm KDS TCXO crystal
- Wolfson WM8960 ADC/ 1W DAC 48khz
- Signal/Tone Blue LED
- TX/PTT Blue LED
Power consumption in combination with a Raspberry PI Zero W
- Receive modus 1.1W
- Transmit modus 1.8W
Shipped items
- 1 x Rf.Guru Assembled SVXLink Analog HotSPOT
- 1 x 32GB SD Card
- 1 x Diamond SRH805 Antenna
Antenna
The included 805SP Nagoya Triple Band Antenna matched perfectly !
Software
https://github.com/Guru-RF/SVXSpot?tab=readme-ov-file#svxlink-bookworm-image
https://github.com/Guru-RF/SVXSpot
Disclaimer
For those planning to connect their hotspot to a base antenna, we strongly advise incorporating an additional band filter. This essential component acts as a safeguard, preventing any potential signal interference due to harmonics.